Nairobi Countertops Experts Nairobi · fabricator, not a supplier

Granite Prices in Kenya: And Why Three Quotes Are Impossible to Compare

The real problem is not the price, it is the unit

Kenyan countertop sellers quote per square foot, per running foot and per slab, often interchangeably and frequently without saying which. That is why three granite quotes for the same kitchen can look wildly different and be impossible to reconcile.

So here is everything converted, and the arithmetic shown, which is the only way to compare anything.

Installed rates

Granite, mid to good quality: KES 2,500 – 6,000 per square foot installed. That is KES 27,000 – 65,000 per square metre.

For quartz the band is KES 3,500 – 7,000 per square foot, or about 38,000 – 75,000 per square metre. Branded quartz lines quoted at KES 31,900 – 48,720 per square metre work out at roughly 2,960 – 4,530 per square foot, which sits inside that band, a useful cross-check that the conversion is right.

Work out your own area first

  1. Measure each run: length × depth in metres = square metres.
  2. Multiply square metres by 10.76 to get square feet.
  3. Apply the rate.

A standard worktop is 600mm deep, so a 3-metre run is 1.8 m², which is about 19 square feet.

Worked examples

Computed from the rate above rather than quoted, so you can check them:

  • 19 sq ft small straight run → KES 48,000 – 116,000
  • 34 sq ft L-shaped kitchen → KES 86,000 – 207,000
  • 54 sq ft family kitchen with island → KES 135,000 – 323,000

Slab prices are not worktop prices

A local granite slab starts around KES 7,500; an imported one such as Black Galaxy around KES 10,500.

Those are raw stone. Templating, cutting, edge profiling, sink and hob cutouts, polishing, transport and installation are the rest, and on a finished worktop the fabrication is usually more than the stone.

A quotation that looks dramatically cheaper than everyone else’s is often a slab price being compared to a worktop price.

A figure with no unit is not a price

If you take one thing from this page: ask “per what?” It is the single question that makes Kenyan countertop quotations comparable, and almost nobody asks it.

Rates

Work Rate Notes
Granite, mid to good quality KES 2,500 – 6,000 / sq ft ≈ KES 27,000 – 65,000 / m²
Quartz, engineered KES 3,500 – 7,000 / sq ft ≈ KES 38,000 – 75,000 / m²
Branded quartz (Caesarstone, Silestone, Cambria) KES 31,900 – 48,720 / m² ≈ KES 2,960 – 4,530 / sq ft
Marble Quoted per slab Priced by the slab because veining is not repeatable, see below
Terrazzo, cast in situ Quoted per run Seamless; no slab constraint

Rates reviewed 2026-08. Every job is confirmed with a written quotation before work starts.

What a worktop rate does not include

These are quoted separately and visibly rather than folded into a square-foot rate, because they are where two apparently similar quotations diverge.

  • Sink and hob cutouts, and any drainer grooves
  • Upstands and full-height splashbacks, priced by the running foot separately
  • Mitred or built-up edge profiles, which double the material at the edge
  • Removing and disposing of the existing worktop
  • Making good where units are not level: tops are templated after levelling, not before

Worked examples

Work Rate Notes
Small straight run, 3.0m × 0.6m (≈19 sq ft) KES 48,000 – 116,000 Granite, installed
L-shaped kitchen (≈34 sq ft) KES 86,000 – 207,000 Granite, installed
Family kitchen with island (≈54 sq ft) KES 135,000 – 323,000 Granite, installed

Rates reviewed 2026-08. Every job is confirmed with a written quotation before work starts.

Frequently asked questions

Why can I not compare two granite quotes?
Because Kenyan suppliers quote in three different units (per square foot, per running foot and per slab) and frequently do not say which. A figure with no unit is not a price. Ask for the unit and the measured area, and two quotes become directly comparable in about a minute.
A supplier quoted me KES 7,000 per square metre. Is that good?
It is almost certainly not per square metre. Installed granite is roughly KES 27,000-65,000 per m². A figure around 7,000 is either per square foot, or it is the raw slab material with no fabrication, no cutouts and no installation. Establish which before comparing it to anything.
What is the difference between a slab price and a worktop price?
The fabrication. A local slab starts around KES 7,500 and an imported one around 10,500, but a slab is a raw piece of stone. Templating, cutting, edge profiling, cutouts, polishing, transport and installation are the rest of the cost, and they are most of it.
How do I work out my own area?
Measure the run length and the depth in metres, multiply for square metres, then multiply by 10.76 for square feet. A standard worktop depth is 600mm, so a 3-metre run is 1.8 m², which is about 19 square feet. Apply the rate and you have a sanity check before anyone visits.

Send us the run lengths

Run lengths and depth in metres is enough for a rate. We will convert it to square feet, apply the band and give you a range, then take you to the yard to choose the actual slab.

Templated after your units are level · seams placed by agreement · sealed before we leave site

Call us WhatsApp a quote